Currently Empty:
CMP Earth Tags
CMP slip on Earth Tags, installed between the Cable Gland and equipment, provide an earth bond connection as specified in BS6121:Part 5:1993 and comply with category B rating specified in IEC 62444. (Datasheet)
CMP Entry Thread Sealing Washers
To maintain the Ingress Protection rating between the equipment and the Cable Gland, it may be necessary to fit an Entry Thread Sealing Washer at the equipment-to-gland entry interface. For installations it is equally essential to maintain the ingress protection integrity at which the equipment has been rated. (Datasheet)
CMP Hexagon Head Stopper Plugs
Hexagon Head Stopper Plug, Globally Approved, Explosive Atmosphere Cable / Conduit Accessory • Provides means of blanking unused cable entries • Temporary or permanent • General purpose / industrial version available • Equipment interface ‘O’ ring seal available • Nylon Ex e only version available (-20°C to +60°C) •-60°C to 200°C (metallic versions) • Globally …
Continue reading CMP Hexagon Head Stopper Plugs
CMP Locknuts
Recommended in securing Cable Glands and Accessories to a gland plate or into equipment. (Datasheet)
CMP M20 Explosive Atmosphere Barrier Cable Gland –
• Metal-to-metal armour clamping • Direct & remote installation • Compound barrier type flameproof seal • Controlled outer ‘load retention’ seal • Unique OSTG prevents overtightening • Integral protected deluge seal • -60°C to +85°C • Globally marked, IECEx, ATEX, UL & cCSAus • Superior EMC performance • Once any cable inner sheath/bedding has been …
Continue reading CMP M20 Explosive Atmosphere Barrier Cable Gland –
CMP PVC Cable Shroud
Shrouds minimize the risk of dirt or foreign substances gathering on the cable gland and point of cable to cable gland interface.
CMP Serrated Washers
Serrated Washers are fitted internally to the equipment before a locknut and act as an anti-vibration device to prevent the Cable Gland or accessory from inadvertently loosening in service. (Datasheet)
Hawke 375 Domed Head Stopping Plug
Plastic Increased Safety Exe – ATEX / IECEx stopping plug The 375 is fitted from the outside of the enclosure. M16 to M75 as standard. Thread length is 15mm as standard. Metric entry threads are 1.5mm pitch as standard. 375 Stopping Plugs are manufactured in Polyamide with Nitrile O-Ring. (Datasheet)