Customer Connection Enclosure

Description
Additional information

Product Description

Application	The Customer Connection Enclosure (CCE) has been designed to be used as an external building entry point. The closure can be wall mounted providing a fibre termination and external network test point. The CCE has been designed to be the same size as a ‘Brick Blow-Out Cover’ to cover any unslightly damage caused by drilling.
Cable ? max	8.5mm
Cable ? min	2.5mm
Colour	Grey (GY)
Connector Colour	Green (GN)
Connector Type	SC-APC
Content	2 x SC/APC Simplex Adaptor Cable Entry Kit 6.0 – 8.5mm/2.5 – 6.5mm Mechanical Fixing Kit Wall Mounting Kit Laser Label
Installed Adapters	2
Material	Acrylonitrile Butadiene Styrene, UV-stabilised (ABSUV)
PART DESCRIPTION	CCE-A11122TX1/GY
Package Content packed in	box
Pigtail Cable Capacity	0
Product Family	Fibre Optic External Enclosure
Product Group	Customer Connection Enclosure
Splice Capacity	4
Technical Description	The Customer Connection Enclosure (CCE) is supplied with 2 x SC/APC Simplex Adaptors. The closure is manufactured from UV stable ABS with a hinged lid which locks in the open position to allow for quick and clear access to the internal fibre. The closure has 6 entry/exit ports at the bottom of the closure and is supplied with 3 cable entry seals 2 x 6.0-8.5mm and 1 x 2.5 – 6.5mm. A loop through facility allows for single fibre elements to be removed and spliced whilst the remaining fibres can be fed on to the next connection point. A single port in the rear of the closure allows for fibre to be passed through the wall into the customer premises. Mechanical fixing is provided to secure all incoming/outgoing cables/blown fibre ducts and to provide strain relief where necessary. Internal positive fibre management and fibre retention clips maintain a minimum 30mm bend radius throughout for up to a maximum of 50m of 1.1mm diameter cable.
Type	CCE-A11122TX1/GY
Variant	Outdoor FTTx Enclosures