Currently Empty:
Metallic conduit, with smooth TPR coating, nom⌀50mm, OD=47.9mm, ID=40.4mm, black, 10m
Liquid-tight (IP68 and IP69k with LTS fittings) | Flame-retardant | High compression, tensile and impact strength | Good flexibility | Smooth outer cover does not wrinkle when bent | Good resistance to acids, petrol, oils and greases | Suitable for outdoor use | Colour: black
Metroseal Fine black Ribbed Rubber Matting to 11,000v (6mm x 10m)
SM551 Fine Ribbed Rubber Matting to 11,000v is a High Quality matting with the regulation standard, stamped on the reverse of the roll at 1000mm intervals. Fully certified and tested to 11,000 volts with a recommended safety working voltage of 450v. (Datasheet)
MG 0.25-6.0mm2 Square Press Cord End Terminal Crimper
Tool parameters Capacity – 0.25~6.0 mm2 A.W.G. – 24~10 A.W.G. Length – 180 mm Weight – 0.38 kg
MG 0.5-2.5mm2 Insulated Terminal Crimper
Tool parameters Capacity – 0.25~2.5 mm2 A.W.G. – 24~14 A.W.G. Length – 230 mm Weight – 0.4 kg
MG 0.5-6.0mm2 5 in 1 Multifunctional Terminal Crimper
Five in one multifunctional crimping pliers for stripping, cutting wires and crimping Non-Insulated & Insulated terminals Tool parameters Capacity – 0.5~6.0 mm2 A.W.G. – 22~10 A.W.G. Length – 235 mm Weight – 0.22 kg
MG 0.5-6.0mm2 Closed-End Wire Connector Crimper
Tool parameters Capacity – 0.5~6.0 mm2 A.W.G. – 24~10 A.W.G. Length – 230 mm Weight – 0.6 kg
MG 0.5-6.0mm2 Cord End Terminal Crimper
Tool parameters Capacity – 0.5~6.0 mm2 A.W.G. – 22~10 A.W.G. Length – 230 mm Weight – 0.6 kg
MG 0.5-6.0mm2 Insulated Terminal Crimper
Tool parameters Capacity – 0.5~6.0 mm2 A.W.G. – 22~10 A.W.G. Length – 230 mm Weight – 0.6 kg
MG 0.5-6.0mm2 Multifunctional Insulated Terminal Crimper
For cutting , stripping and crimping Insulated terminals Tool parameters Capacity – 0.5~6.0 mm2 A.W.G. – 22~10 A.W.G. Length – 235 mm Weight – 0.22 kg
MG 1.5-10.0mm2 Un-Insulated Terminal Crimper
Tool parameters Capacity – 1.5~10.0 mm2 A.W.G. – 16~8 A.W.G. Length – 230 mm Weight – 0.6 kg
MG 240mm2 Hydraulic Lug Crimper
It is applicable to press connection of cable copper and aluminum terminals. Tool parameters Capacity – 16~240 mm2 Weight – 4.8 kg
MG 5.5-38mm2 Un-Insulated Terminal Crimper
Tool parameters Capacity – 5.5~38 mm2 A.W.G. – 10~2 A.W.G. Length – 367 mm Weight – 0.95 kg