Currently Empty:
Coruba Ribbed Black Rubber Matting to 1000v Working / 10,000V tested (3mm x 10m)
Coruba SM570-00 Fine Ribbed Black EPDM Rubber Matting to IEC61111-2009 Class 0, is a high quality electrical safety matting fully tested to 1,000 volts with regulation standard stamped on reverse of roll at 1000mm intervals. Maximum safety working voltage of 1,000v. It has a fine ribbed, anti-slip surface pattern on one side and a cloth impression …
Continue reading Coruba Ribbed Black Rubber Matting to 1000v Working / 10,000V tested (3mm x 10m)
Coruba Ribbed Gray Rubber Matting to 1000V/10000V tested (3mm x 10m)
Coruba are proud distributors of METROSEAL SM571-00 to IEC61111-2009 Class 0 METROSEAL SM571-00 Fine Ribbed Grey EPDM Rubber Matting to IEC61111-2009 Class 0, is a high quality electrical safety matting fully tested to 1,000 volts with regulation standard stamped on reverse of roll at 1000mm intervals. Maximum safety working voltage of 1,000v. It has a …
Continue reading Coruba Ribbed Gray Rubber Matting to 1000V/10000V tested (3mm x 10m)
Envo-tite Yellow Anti-Tamper Seal
Anti-Tamper Seals to show whether a fire extinguisher has been tampered with or not.
Hempel HS 55610 Curing Agent (2.5L) Part B
HEMPATHANE HS 55610 is a two-component glossy acrylic polyurethane topcoat, cured with aliphatic isocyanate, with good gloss and color retention. Contains zinc phosphate (Datasheet)
Hempel Multi 500 Curing Agent (4,L) Part B
Hempaprime Multi 500 is a fast drying, high solids epoxy paint. It provides hard wearing and long lasting barrier protection in coating systems for severe corrosive environments. The product meets the requirements of ISO 12944 Part 5, 2019 when used as part of a predefined paint system. (Datasheet)
Hempel Multi 500 Epoxy paint (16,L) Part A
Hempaprime Multi 500 is a fast drying, high solids epoxy paint. It provides hard wearing and long lasting barrier protection in coating systems for severe corrosive environments. The product meets the requirements of ISO 12944 Part 5, 2019 when used as part of a predefined paint system. (Datasheet)
Honeywell Switchboard Matting ASTM Class 4 (per/m)
Made from high quality Type II material, Class 4 matting is 1/2” thick and tested to 40kV. The matting complies with ASTM D178, Class 4 specifications. Maximum Use AC Voltage ; Class 4, 36,000 volt 914mm wide by 12mm thick
