Total:
Ideal Weatherproof Wire Connecter, 61 Series, Grey/Orange, 600V, 2,5mm2
100% Silicone-based sealant protects against moisture and corrosion UL Listed to 486G Sealed Twist-On Wire Connector for use in damp/wet locations or above-grade applications Easy to apply, pre-filled twist-on wire connectors Eliminates the need for heat-shrink or excessive taping Tough, UL 94V-2 flame-retardant shell rated at 105°C (221°F) 450V, 24A Rating 1.5 to 2.5mm2 (22 …
Continue reading Ideal Weatherproof Wire Connecter, 61 Series, Grey/Orange, 600V, 2,5mm2
Ideal Weatherproof Wire Connecter, 61 Series, Grey/Red, 450V, 4,0mm2
100% Silicone-based sealant protects against moisture and corrosion UL Listed to 486G Sealed Twist-On Wire Connector for use in damp/wet locations or above-grade applications Easy to apply, pre-filled twist-on wire connectors Eliminates the need for heat-shrink or excessive taping Tough, UL 94V-2 flame-retardant shell rated at 105°C (221°F) 450V, 32A Rating 1.5 to 4.0mm2 (18 …
Continue reading Ideal Weatherproof Wire Connecter, 61 Series, Grey/Red, 450V, 4,0mm2
Ideal Wire Nut Connecter, 71B Series, Grey, 300V, 1,5mm2
With a fixed, square-wire spring and a positive grip shell, the Wire-Nut is perfect to twist-on with fingers for a secure connection that will last. 300V Rating 0.34 to 1.5mm2 (22 to 16 AWG) Min 2 x 0.34mm2 (Min 2 x #22) Max 3 x 1.5mm2 (Max 3 x #16)
Ideal Wire Nut Connecter, 72B Series, Blue, 300V, 2,5mm2
With a fixed, square-wire spring and a positive grip shell, the Wire-Nut is perfect to twist-on with fingers for a secure connection that will last. 300V Rating 0.34 to 2.5mm2 (22 to 14 AWG) Min 2 x 0.34mm2 (Min 2 x #22) Max 3 x 1.5mm2 (Max 3 x #16)
Ideal Wire Nut Connecter, 73B Series, Orange, 600V, 2,5mm2
With a fixed, square-wire spring and a positive grip shell, the Wire-Nutis perfect to twist-on with fingers for a secure connection that will last. 600V Rating 0.34 to 2.5mm2 (22 to 14 AWG) Min 1 x 0.75mm2 with 1 x 0.5mm2 (Min 1 x #18 with 1 x #20) Max 4 x 1.5mm2 with 1 …
Continue reading Ideal Wire Nut Connecter, 73B Series, Orange, 600V, 2,5mm2
Ideal Wire Nut Connecter, 74B Series, Yellow, 600V, 4,0mm2
With a fixed, square-wire spring and a positive grip shell, the Wire-Nutis perfect to twist-on with fingers for a secure connection that will last. 600V Rating 0.75 to 4.0mm2 (18 to 12 AWG) Min 2 x 0.75mm2 (Min 2 x #18) Max 4 x 2.5mm2 with 1 x 0.75mm2 (Max 4 x #12)
Ideal Wire Nut Connecter, 76B Series, Red, 600V, 16mm2
With a fixed, square-wire spring and a positive grip shell, the Wire-Nutis perfect to twist-on with fingers for a secure connection that will last. 600V Rating 0.75 to 16.0mm2 (18 to 6 AWG) Min 2 x 2.5mm2 (Min 2 x #14) Max 2 x 4mm2 (Max 4 x #12)
Ideal wire pulling lubricant Yellow 77
Safe to use with most cable types except low-density polyethylene and semi-conducting jackets Clings to cable throughout long runs, even where moisture is present Remains temperature stable from 32°F to 130°F (0°C to 54°C) Dries slowly to a thin, non-conductive film that won’t harden in conduit Environmentally safe – non-toxic, non-flammable and non-corrosive
Identification cable tie tamper-evident, 100.0×2.5mm, ⌀6.00-22.00mm, natural, 100pcs.
Identification ties made of Polyamide 6.6 | For simple identification and securing of cable bundles in one step | Printable labels are available for a professional finish | Manual or temporary marking is possible with an indelible pen (T82S-BK / T82R-RD)
Identification cable tie tamper-evident, 100.0×25.0mm, ⌀4.8-19.0mm, black, 100pcs.
Identification ties made of Polyamide 6.6 | For simple identification and securing of cable bundles in one step | Printable labels are available for a professional finish | Manual or temporary marking is possible with an indelible pen (T82S-BK / T82R-RD)
Identification cable tie tamper-evident, 100.0×25.0mm, ⌀4.8-19.0mm, black, 100pcs.
Identification ties made of Polyamide 6.6 | For simple identification and securing of cable bundles in one step | Printable labels are available for a professional finish | Manual or temporary marking is possible with an indelible pen (T82S-BK / T82R-RD)
Identification cable tie tamper-evident, 100.0×25.0mm, ⌀4.8-19.0mm, blue, 100pcs.
Identification ties made of Polyamide 6.6 | For simple identification and securing of cable bundles in one step | Printable labels are available for a professional finish | Manual or temporary marking is possible with an indelible pen (T82S-BK / T82R-RD)